AIR TRANSFER TUBE
AEROSPACE COMPONENT
This assembly comprises of two forged titanium rings that are machined to aerospace standards.
The centre section is titanium sheet that is formed in two halves and then fabricated.
The entire assembly is precision rotary welded, plasma coated and dynamically balanced.
HP TURBINE AIR BAFFLE
AEROSPACE COMPONENT
This assembly comprises two Nimonic flanges that are CNC machined to aerospace tolerance.
The centre section is Nimonic sheet that is formed and stress relieved prior to assembly.
The entire assembly is precision rotary welded, and turned, milled and ground using CNC machines.
The holes are spark eroded with high precision.
AIR TRANSFER TUBE
AEROSPACE COMPONENT
This assembly comprises of three 6-4 Titanium flanges, which are machined on a
CNC machine, and precision rotary welded to two fabricated 6-4 titanium tube.
The entire assembly is then machined.
ENGINE ACTUATOR BUILD KIT
AEROSPACE COMPONENT
Various components produced from formed and machined Titanium square section tube.
A number of the components have precision machined inserts and connectors.
FUEL STORAGE CANISTER
NUCLEAR FUEL INDUSTRY
A stainless Steel canister that is manufactured using a series of
complicated deep-drawing process that is unique to C.W.Fletcher & Sons Limited.
FABRICATED CONE
AEROSPACE COMPONENT
18/8 stainless steel fabricated cone. Body is rolled, welded and expanded and the
end is then press formed. A resistance welded stiffener ring and anchor nuts are fitted.
SEAL RING
AEROSPACE COMPONENT
This assembly comprises of two 6/4 Titanium forged rings, which are conventionally and CNC machined to aerospace tolerances.
The centre sections are produced from Titanium sheet, which is rolled and expanded to its finished size.
The entire assembly is precision rotary welded, and turned, milled and drilled using CNC machines.
"L" MOUNTED BRACKET
Jethete casting with tightly toleranced holes and faces machined on a five axis CNC machine.
SPLITTER TRAY
Pressed and machined component produced from Inco 718, a nickel based heat-resisting alloy. The component is hot formed, heat-treated and handset. The profiles are water jet cut and then CNC milled to achieve very tight positional tolerances.
BLEED VALVE
DUCT ASSEMBLY
A Jethete assembly comprising of 4 possess, including a radius top cap with 4,623
laser-drilled holes. These holes are 2,3mm diameter and are drilled in three groups.
The assembly is fusion welded and X-rayed. The outer flange is resistance welded to the main body.
CENTRE BRACKET
Jethete castings with tapped holes and tightly toleranced-drilled holes produced on one of our 5 axis CNC machining centres.
HEAT SHIELD
Assemblies produced from nickel alloy sheet. Ribs are press formed and seam welded on to the back plate. The assembly is then heat-treated.
DUCT ASSEMBLY
18/8 stainless steel duct assembly. A sheet metal body joins two cast and machined ends.
ELECTRICAL MOUNTING BRACKET
18/8 stainless steel assembly formed on our CNC pressbrake with extra bracket attached by resistance welding.
FUEL DRAINS TANK
Stainless steel tank produced in two halves, each consisting of a pressing with a welded in boss.
Bosses are CNC milled and turned before welding. The two halves are then welded together and hand set. All welds are X-rayed.
SECTION OF ENGINE MANIFOLD
AEROSPACE COMPONENT
Produced from a range of sheet titanium rolled sections and pressings, which are resistance and fusion welded together.
